Roll over image to zoom in
Аксесоар, Huawei Power Analyser JANITZA UMG 104
1,641.00 лв.
| Х-ка 1 | Line circuit breaker: 6A, Typ C (approved to UL / IEC); Cylindrical fuses: 0.6A, tripping characteristics M (medium time lag); Cylindrical fuses: 0.75A, tripping characteristics F (fast acting) |
|---|---|
| Х-ка 2 | 2 digital inputs – Maximum counting frequency: 20 Hz; Response time (Jasic program): 200 ms; Input signal applied: 18V. 28 V DC (typically 4 mA); Input signal not applied: 0 .. 5 V DC, current less than 0.5 mA |
| Х-ка 3 | 2 digital outputs – Switching voltage: max 60 V DC, 30 V AC; Switching current: max 50 mAeff AC/DC; Response time (Jasic program): 200 ms; Output of voltage dips: 20 ms; Output of voltage overranges: 20 ms; Pulse output (operating pulses): max 20 Hz |
| Х-ка 4 | Interfaces – RS232: 5 pin screw-type terminals, Modbus RTU/slave, Transfer rate 9.6/19.2/38.4/115.2 kbps; RS485: 2 pin screw-type terminals, Modbus RTU/slave, Transfer rate 9.6/19.2/38.4/57.6/115.2/921.6 kbps |
| Х-ка 5 | Three-phase 4/3-wire systems max. 277 V/480 V; Measurement category: 300V CAT III; Impedance: 4 MOhm/phase; Scanning frequency: 20 kHz/phase |
| Х-ка 6 | Nominal current 5A; Crest factor: 2(based on 6 Arms); Resolution in the display: 10mA; Measurement category: 300 V CAT III; Overload for 1 sec: 100 A (sinusoidal); Scanning frequency: 20 kHz |
| Х-ка 7 | Protection IP20 according to EN 60529; Dimensions: 107.5 x 90 x 82 mm, Weight: 350 g |
| Гаранция | 24 месеца |
